What is 192.168.1.1 IP address

192.168.1.1 is the default gateway IP address that is commonly used on home and small office routers.

Some key things to know about 192.168.1.1:

So in summary, 192.168.1.1 is the address of your router’s LAN interface that connects your home/office network to the internet. It serves as the gateway and administrative access point for the local network.

What Routers Use This IP Address?

The 192.168.1.1 IP address is used as the default gateway address on many common home and small office router models from various manufacturers:

So while not every home router will use 192.168.1.1, it is very commonly found as the gateway IP address on many popular models from Linksys, NETGEAR, TP-Link, D-Link, Asus, and other consumer WiFi router brands. Checking your own router’s documentation can confirm specifically if 192.168.1.1 is used.

How to Login 192.168.1.1?

Here are the typical steps to log in to the router admin interface at 192.168.1.1:

  1. Connect your computer directly to the router using an ethernet cable. This ensures you are on the same 192.168.1.0/24 network.
  2. Open any web browser on your computer and enter “192.168.1.1” in the address bar. Press enter.
  1. You should be prompted for a username and password. The defaults are often:
  1. Enter the correct username and password for your router. These are case-sensitive.
  2. If the defaults do not work, refer to your router documentation for the correct admin login credentials. They may also be printed on a sticker on your router.
  3. After logging in, you will see your router’s administration interface. This allows you to configure settings like WiFi, port forwarding, parental controls, DHCP reservation, and more.

Important: Make sure you change the default admin password to prevent security risks. Also note that you must be directly connected to the router’s network to access the login page at 192.168.1.1.

Common Mistakes Users Make When Spelling IP Addresses

Here are some common mistakes users make when trying to enter IP addresses:

Double checking IP address formatting and carefully typing out digits can help avoid common mistakes accessing router admin interfaces. Taking an extra moment to validate goes a long way.

What configuration is available at 192.168.1.1

The 192.168.1.1 IP address is the default gateway for most home and small office routers. Here are some of the key features you can configure when logged into your router’s admin console:

The exact menu structure and available settings will depend on your specific router model and brand. But the above covers some of the most common configuration available when logged into your router at 192.168.1.1.

How to Configure Your Router in Four Easy Steps 

Here is a simple 4-step process to configure your home or office router:

  1. Login to Your Router Admin Page
  1. Setup Your Wifi Network
  1. Configure DHCP Settings
  1. Update Router Firmware

That covers the basics! You can further customize things like port forwarding, parental controls, connections limits, and more. But the steps above will get your router up and running securely.

What is the 192.168.1.1 admin username and password?

The admin username and password for logging into your router’s interface at 192.168.1.1 depends on the specific router model and manufacturer. Here are some common default credentials:

While many routers use the above defaults, some models may use different credentials. Always check your router’s manual or support site for the exact default admin login information. We don’t recommend using default passwords – they should be changed to something secure during initial setup.

If you cannot find the correct credentials, you may need to reset the router to factory default settings. This will restore the login username/password to the defaults listed above. Just be aware that resetting will clear any custom settings.

Top 192.168.1.1 Logins

UsernamePasswordReliability
adminadmin57%
adminpassword8%
noneadmin6%
nonenone5%
admin12345%
adminnone2%
guestguest2%
blankadmin1%
none12341%
rootnone1%

What if you do not recall your username and password?

If you don’t remember or have lost the admin username and password for your router interface at 192.168.1.1, there are a few options:

  1. Look up the default credentials for your router model in the user manual or online. Many use common defaults like “admin/admin” or “admin/password”.
  2. Try a router password recovery tool. Some routers have a recovery feature that can email you the credentials if you provide the router info and register your email.
  3. Do a hardware factory reset on the router. There is usually a recessed reset button you can press and hold with a paperclip for 10-30 seconds. This will reset all settings, including admin credentials, back to factory defaults.
  4. Log in using an alternative method if available. Some routers may allow you to access the admin console via an app or web portal using your ISP account.
  5. Contact your internet provider or router manufacturer for support. They can look up and provide your admin credentials if you confirm account ownership.
  6. As a last resort, replace the router hardware if none of the above options work and you absolutely need admin access.

Be sure to record your customized admin username and password in a safe place after changing it from the defaults. Locking yourself out of the router admin is easily avoided.

How to Change Route IP Address?

Here are the steps to change the IP address of your router’s admin interface:

  1. Log into your router’s admin console using the current IP address (usually 192.168.1.1). You’ll need to enter your admin username and password.
  2. Navigate to the Network or LAN settings. There should be an option to configure the “LAN IP Address” or “Local IP Address” for the router.
  3. Enter the new IP address you want to assign. For home networks, some common options are:
    • 192.168.0.1
    • 192.168.10.1
    • 10.0.0.1
  4. Choose an IP address from the subnet range your LAN is using. Avoid using an address already taken by another device.
  5. Save your changes and reboot the router for settings to take effect.
  6. After rebooting, login to the router admin using the new IP address.
  7. Also update the router’s IP address stored in other devices like port forwarding rules or DHCP reservations.
  8. Document the new IP address for future reference.

Changing the router IP address is straightforward once you access the admin console.

TP-Link 

  1. Login to your router’s default admin panel at 192.168.0.1 or 192.168.1.1. The default username is usually “admin” and default password is usually “admin”.
  2. Go to the Advanced settings section, then navigate to the Network > LAN settings.
  3. Under the “IP Address” field you can change the address to your desired IP address such as 192.168.1.2.
  1. Save the changes and your router will reboot to apply the new IP address.
  2. Once rebooted, login to your router admin panel using the new IP address you set.
  3. You may also need to update the router’s IP address in any port forwarding rules, DHCP reservations, or other places it was configured.

D-Link

  1. Login to your router configuration page (default username: admin, default password: admin/blank)
  2. Go to Setup > Network Settings
  3. Find the Router IP Address field
  1. Change the IP address to your preferred new IP and Save Settings

Netgear

  1. Login to Netgear router settings page via 192.168.1.1 or 192.168.0.1 or use http://www.routerlogin.net or http://www.routerlogin.com.
  2. The default username is admin and default password is password.
  3. Once logged in, navigate to Advanced > From the left menu go to Setup > LAN Setup.
  4. Under LAN TCP/IP Setup, find the IP Address field. Change the IP to your preferred new IP.
  1. Apply the changes and the router will reboot to update settings.

Troubleshooting 192.168.1.1 or 192.168.l.l

Here are some tips for troubleshooting access issues with the 192.168.1.1 router login page:

Be sure to check your specific router’s documentation as well for additional troubleshooting steps.

Got any recommendations?