What is IP address is the default gateway IP address that is commonly used on home and small office routers.

Some key things to know about

  • It belongs to the private IP range of This entire range is reserved for use in local area networks (LANs).
  • Within a network, is typically assigned to be the IP address of the router interface that connects to the local network.
  • It serves as the default gateway for other devices on the LAN, such as computers, phones, printers etc. This allows these devices to communicate to the internet via the router.
  • Accessing in a web browser will open the router’s administrative interface. This allows you to configure settings like WiFi name/password, port forwarding rules, DHCP pool settings, firewall rules etc.
  • It is a private IP address and is not accessible from the public internet. It is only reachable within the local network.

So in summary, is the address of your router’s LAN interface that connects your home/office network to the internet. It serves as the gateway and administrative access point for the local network.

What Routers Use This IP Address?

The IP address is used as the default gateway address on many common home and small office router models from various manufacturers:

  • Linksys – Many Linksys router models use as the default IP address including the Linksys WRT54G, Linksys E1200 N600, and Linksys EA6350 AC1200+ routers.
  • NETGEAR – Many NETGEAR routers use like the NETGEAR N600, NETGEAR R6000, and NETGEAR Nighthawk routers.
  • TP-Link – TP-Link routers frequently use as well including the TP-Link Archer C7 AC1750 and TP-Link Archer A7.
  • D-Link – D-Link routers that utilize include models like the D-Link DIR-815 AC1200 and D-Link DIR-868L.
  • Asus – Asus RT-AC68U, Asus RT-N66U, and other Asus routers also commonly use this IP address.
  • Belkin – Belkin N600 DB and Belkin AC1200 routers have as the default.

So while not every home router will use, it is very commonly found as the gateway IP address on many popular models from Linksys, NETGEAR, TP-Link, D-Link, Asus, and other consumer WiFi router brands. Checking your own router’s documentation can confirm specifically if is used.

How to Login

Here are the typical steps to log in to the router admin interface at

  1. Connect your computer directly to the router using an ethernet cable. This ensures you are on the same network.
  2. Open any web browser on your computer and enter “” in the address bar. Press enter.
  3. You should be prompted for a username and password. The defaults are often:
    • Username: admin
    • Password: admin or password
  4. Enter the correct username and password for your router. These are case-sensitive.
  5. If the defaults do not work, refer to your router documentation for the correct admin login credentials. They may also be printed on a sticker on your router.
  6. After logging in, you will see your router’s administration interface. This allows you to configure settings like WiFi, port forwarding, parental controls, DHCP reservation, and more.

Important: Make sure you change the default admin password to prevent security risks. Also note that you must be directly connected to the router’s network to access the login page at

Common Mistakes Users Make When Spelling IP Addresses

Here are some common mistakes users make when trying to enter IP addresses:

  • Transposing digits – Writing instead of Double check numbers are in the correct order.
  • Using the wrong dots – Putting only one dot like 19216811 or omitting dots completely like 1921681101. IP addresses require three dots separating four octets.
  • Uppercase letters – Using IP like 192.168.A.1. IP addresses can only contain numbers 0-9, not letters.
  • Extra zeros – Adding unnecessary leading zeros like While allowed, simplifying to improves readability.
  • Decimal instead of dots – Entering the IP as 1921681001001. Dots are required to delimit octets.
  • Incorrect octets – Having an octet value over 255 like Octets must be 0 – 255 in decimal format.
  • Including subnets – Adding CIDR subnets like Routers only need the basic IP for login, not the subnet.
  • Incomplete IP – Entering just 192.168 or 192. Typos often cause leaving off full 4 octet IP addresses.
  • Static vs DHCP – Forgetting whether you assigned a static or DHCP assigned IP to the router.

Double checking IP address formatting and carefully typing out digits can help avoid common mistakes accessing router admin interfaces. Taking an extra moment to validate goes a long way.

What configuration is available at

The IP address is the default gateway for most home and small office routers. Here are some of the key features you can configure when logged into your router’s admin console:

  • Wireless Settings – Configure your WiFi network name (SSID), password, security type, broadcast options, WiFi channels, and related wireless settings.
  • LAN Settings – Define LAN IP address ranges, DHCP server options, reservations, and local network configurations.
  • Port Forwarding – Set up port forwarding rules to allow access to devices on your local network from the internet.
  • Parental Controls – Block specific websites and set internet access times. Useful for managing kids’ connectivity.
  • Firewall Settings – Enable or disable the router firewall, set up access rules, DMZ, and other security settings.
  • Remote Access – Allow remote administration of the router from outside the network.
  • Admin Settings – Change admin password, set login timeouts, update firmware, backup/restore configurations.
  • Connection Status – View device connections to the network, internet bandwidth usage, outages, and system logs.
  • Advanced Routing – Configure VLANs, static routes, dynamic routing like RIP, access point modes, and more advanced options.

The exact menu structure and available settings will depend on your specific router model and brand. But the above covers some of the most common configuration available when logged into your router at

How to Configure Your Router in Four Easy Steps 

Here is a simple 4-step process to configure your home or office router:

  1. Login to Your Router Admin Page
  • Open web browser and go to router’s IP address (usually or
  • Enter admin username and password (default is often admin/admin)
  1. Setup Your Wifi Network
  • Go to Wireless or WiFi settings
  • Create your network name (SSID) and choose a secure password
  • Select your encryption type (WPA2 is most secure)
  1. Configure DHCP Settings
  • Navigate to LAN or DHCP menu
  • Set IP address range and lease time for connecting devices
  1. Update Router Firmware
  • Go to admin page status info to check current firmware version
  • Visit router vendor website and update to newest firmware
  • Follow instructions to install firmware update

That covers the basics! You can further customize things like port forwarding, parental controls, connections limits, and more. But the steps above will get your router up and running securely.

What is the admin username and password?

The admin username and password for logging into your router’s interface at depends on the specific router model and manufacturer. Here are some common default credentials:

  • Linksys routers:
    • Username: admin
    • Password: admin or blank (leave password field empty)
  • Netgear routers:
    • Username: admin
    • Password: password
  • TP-Link routers:
    • Username: admin
    • Password: admin
  • D-Link routers:
    • Username: admin
    • Password: blank (leave password field empty)
  • Asus routers:
    • Username: admin
    • Password: admin
  • Belkin routers:
    • Username: Admin
    • Password: password

While many routers use the above defaults, some models may use different credentials. Always check your router’s manual or support site for the exact default admin login information. We don’t recommend using default passwords – they should be changed to something secure during initial setup.

If you cannot find the correct credentials, you may need to reset the router to factory default settings. This will restore the login username/password to the defaults listed above. Just be aware that resetting will clear any custom settings.

Top Logins

Username Password Reliability
admin admin 57%
admin password 8%
none admin 6%
none none 5%
admin 1234 5%
admin none 2%
guest guest 2%
blank admin 1%
none 1234 1%
root none 1%

What if you do not recall your username and password?

If you don’t remember or have lost the admin username and password for your router interface at, there are a few options:

  1. Look up the default credentials for your router model in the user manual or online. Many use common defaults like “admin/admin” or “admin/password”.
  2. Try a router password recovery tool. Some routers have a recovery feature that can email you the credentials if you provide the router info and register your email.
  3. Do a hardware factory reset on the router. There is usually a recessed reset button you can press and hold with a paperclip for 10-30 seconds. This will reset all settings, including admin credentials, back to factory defaults.
  4. Log in using an alternative method if available. Some routers may allow you to access the admin console via an app or web portal using your ISP account.
  5. Contact your internet provider or router manufacturer for support. They can look up and provide your admin credentials if you confirm account ownership.
  6. As a last resort, replace the router hardware if none of the above options work and you absolutely need admin access.

Be sure to record your customized admin username and password in a safe place after changing it from the defaults. Locking yourself out of the router admin is easily avoided.

How to Change Route IP Address?

Here are the steps to change the IP address of your router’s admin interface:

  1. Log into your router’s admin console using the current IP address (usually You’ll need to enter your admin username and password.
  2. Navigate to the Network or LAN settings. There should be an option to configure the “LAN IP Address” or “Local IP Address” for the router.
  3. Enter the new IP address you want to assign. For home networks, some common options are:
  4. Choose an IP address from the subnet range your LAN is using. Avoid using an address already taken by another device.
  5. Save your changes and reboot the router for settings to take effect.
  6. After rebooting, login to the router admin using the new IP address.
  7. Also update the router’s IP address stored in other devices like port forwarding rules or DHCP reservations.
  8. Document the new IP address for future reference.

Changing the router IP address is straightforward once you access the admin console.


  1. Login to your router’s default admin panel at or The default username is usually “admin” and default password is usually “admin”.
  2. Go to the Advanced settings section, then navigate to the Network > LAN settings.
  3. Under the “IP Address” field you can change the address to your desired IP address such as
  4. Save the changes and your router will reboot to apply the new IP address.
  5. Once rebooted, login to your router admin panel using the new IP address you set.
  6. You may also need to update the router’s IP address in any port forwarding rules, DHCP reservations, or other places it was configured.


  1. Login to your router configuration page (default username: admin, default password: admin/blank)
  2. Go to Setup > Network Settings
  3. Find the Router IP Address field
  4. Change the IP address to your preferred new IP and Save Settings


  1. Login to Netgear router settings page via or or use http://www.routerlogin.net or http://www.routerlogin.com.
  2. The default username is admin and default password is password.
  3. Once logged in, navigate to Advanced > From the left menu go to Setup > LAN Setup.
  4. Under LAN TCP/IP Setup, find the IP Address field. Change the IP to your preferred new IP.
  5. Apply the changes and the router will reboot to update settings.

Troubleshooting or 192.168.l.l

Here are some tips for troubleshooting access issues with the router login page:

  • Make sure you are connecting to the router’s network – Connect via ethernet or connect your device to the router’s WiFi network. You cannot access remotely.
  • Double check the router’s default gateway IP address – Some routers may use or another address besides Refer to your router’s documentation for the correct one.
  • Try rebooting the router – Reset the power on the router and allow it to boot back up fully.
  • Ensure your device’s IP settings are correct – Set your device to get IP automatically via DHCP rather than using a static IP.
  • Clear your browser cache and cookies – Cache/cookies can sometimes interfere with accessing the admin login page.
  • Factory reset the router – As a last resort, reset the router to factory default settings in case the admin login settings were changed.
  • Check for firewall/security software blocking access – Disable any internet security or firewall programs temporarily to see if they allow access.
  • Ensure your router firmware is up to date – Check the router vendor’s website for the latest firmware and install it if an update is available.

Be sure to check your specific router’s documentation as well for additional troubleshooting steps.






Leave a Reply

Your email address will not be published. Required fields are marked *